Armino Wi-Fi Instruction

Armino Wi-Fi Feature List

  • Compatible with 802.11 b/g/n/ax 2.4GHz Standard

  • Support both HT20 and HT40

  • Support 802.11N MCS0-7

  • Support STA、SoftAP and Direct Mode

  • Support AP+STA Concurrent

  • Support WPA、WPA2 and WPA3 Encryption

  • Support AMPDU、QoS

  • Suuport Low-Power in STA Mode

Armino Wi-Fi Programming Model

../../_images/program.png

Wi-Fi Driver is an isolated component from upper-layer code(such as TCP/IP、Applicant Task..etc). Usually, Customer applicantion program is responsible for Wi-Fi initialization and necessary configuration. Wi-Fi Driver accepts and processes data requested by API, and nofitys the application to process related events.

Armino Wi-Fi Events

EVENT_WIFI_SCAN_DONE

The scanning completion event is reported when the full channels scan finshed. After receiving this event, the application’s event callback function could call bk_wifi_scan_get_result to get scan results.

EVENT_WIFI_STA_CONNECTED

The event indicates STA connecting with AP successfully. When received this event, Wi-Fi Driver will start DHCP server to get ip address or use static one according to the application’s response.

EVENT_WIFI_STA_DISCONNECTED

Wi-Fi_STA_DISCONNECTED event usually indicates the disconection from AP. The Client application needs to close sockets when receiving this event. If this event is not expected, it could start the reconnect process.

Armino Wi-Fi Station Connect Scenario

../../_images/connect_procedure_en.png

Wi-Fi Initialization

  • App Task calls app_wifi_init interface to initialize bk_event_init、bk_netif_init、bk_wifi_init

Wi-Fi Configuration

  • After Wi-Fi initialization, it will configure workqueue、Wi-Fi MAC、PHY…etc

Wi-Fi Starting Up

  • Wi-Fi Driver starts with interface bk_wifi_sta_start

  • Customer could do some confgurations such as channel、modes、data rate..etc

  • Initialize Lwip stack and wpa_supplicant

Wi-Fi Connecting Phase

  • Wi-Fi Driver enters corresponding mode according to the latest config, default is STA mode

  • Excute scan and connect commands

  • Report EVENT_WIFI_SCAN_DONE based on the scanning results

  • After connecting successfully, Wi-Fi driver will return EVENT_WIFI_STA_CONNECTED

  • The callback function will transmit the connected event to application task

Wi-Fi Obtain IP

  • Start DHCP client to obtain IP address

  • SM_DHCP_DONE_IND will be sent after IP address was obtained

  • The application will creat TCP/UDP socket operation with this indication

Wi-Fi Station Connect Example

net sta enable
net sta scan once
net sta scan result
net sta config SSID PW              //keep PW NULL in OPEN Mode
net sta connect

Armino Wi-Fi Station Disconnect Example

../../_images/sta_disconnect_en.png
  • Application could call function bk_wifi_sta_disconnect to deactivate from currently connected router

  • When Wi-Fi connection is disconnected due to active disconnection, offline router, or weak RSSI signal, the Wi-Fi event callback function will send EVENT_WIFI_STA_DISCONNECTED

  • After receiving the network disconnection event, the application will clear all the network applications, for example, TCP/UDP client socket

  • Usually for unexpected Wi-Fi disconnection, the application will initialize a reconnection

Armino Wi-Fi shutdown Scenario

It is similar to Station disconnection case, please refer to previous chapter.

Armino Wi-Fi SoftAP Mode

The usage of BEKEN SoftAP mode could read bk_wifi_ap_start from API develop guide, stations list connected with AP comes from bk_wifi_ap_get_sta_list .

Armino Wi-Fi Failure Reason Code

../../_images/reason_codes.png

Armino Wi-Fi MAC Address Configuration

The configuration of Wi-Fi MAC address is in bk_system\mac.c,it contains base_mac、sta_mac、ap_mac.The overall architecture of BEKEN Wi-Fi MAC address is as follows:

  • It contains three functional macros:CONFIG_NEW_MAC_POLICY、CONFIG_RANDOM_MAC_ADDR、CONFIG_BK_MAC_ADDR_CHECK,all of them are configured to yes by default

  • CONFIG_NEW_MAC_POLICY defines the MAC address are stored in the first 6 bytes of Net_param partition;if this area is empty,use a random MAC address

  • When first 6 bytes of Net_param are empty and CONFIG_RANDOM_MAC_ADDR is enabled,the MAC address is randomly generated then will be stored in Net_param partition.Certainly,the MAC address generated randomly will follow BEKEN MAC address rules: C8:47:8C

  • CONFIG_BK_MAC_ADDR_CHECK is used to determine whether the MAC address configured by the customer complies with the BEKEN rule C8:47:8C .If not required,set it to N in the defconfig file

  • All above three macro definitions are located in middleware\soc\bk7236\bk7236.defconfig ,with default values of y

  • Using the MAC Address Configuration Tool: bk_writer writes the MAC address to flash.If the flash is fully erased,it will cause the MAC address to be lost,resulting in the use of random MAC address

  • use command mac for temporary test,the example is as follows:

mac c8478caabbcc