Wi-Fi Cli命令指南
====================================================
为方便客户快速了解SDK以及开发调试，SDK集成了一些Wi-Fi基本操作指令

代码路径
------------------------------------------------------
``beken378\func\wlan_ui\wlan_cli.c``

cli命令简介
------------------------------------------------------
SDK支持的Wi-Fi相关的cli命令如下表：




+-----------------------------------------------------+--------------------------+------------------------------+
| Command                                             | Param                    | Description                  |
+=====================================================+==========================+==============================+
|                                                     | param1: ssid             | 目标路由器                   |
| sta: sta [ssid] [password]                          +--------------------------+------------------------------+
|                                                     | param2: password         | 目标路由器密码               |
+-----------------------------------------------------+--------------------------+------------------------------+
|                                                     | param1: ssid             | 自定义热点名称               |
|                                                     +--------------------------+------------------------------+
| ap: ap ssid [password]                              | param2: password         | 自定义热点密码               |
+-----------------------------------------------------+--------------------------+------------------------------+
| scan: scan                                          | 无                       | 扫描附近所有热点             |
+-----------------------------------------------------+--------------------------+------------------------------+
|                                                     | param1: ip               | 目标主机IP地址               |
| ping: ping [ip] [count]                             +--------------------------+------------------------------+
|                                                     | param2: count            | Ping包数量                   |
+-----------------------------------------------------+--------------------------+------------------------------+
| wifistate: wifistate - show STA/AP state            | 无                       | 显示当前Station/SoftAP状态   |
+-----------------------------------------------------+--------------------------+------------------------------+
| ifconfig: ip - show STA/AP ip                       | 无                       | 显示当前Station网络连接参数  |
+-----------------------------------------------------+--------------------------+------------------------------+
| stopintf: stop {sta|ap} intfacename                 | 1:sta   0:ap             | 停止当前Station/SoftAP       |
+-----------------------------------------------------+--------------------------+------------------------------+
|                                                     | -s                       | DUT作为Server                |
|                                                     +--------------------------+------------------------------+
| iperf: iperf [-s|-c|-stop]                          | -c -u                    | DUT作为Client, -u表示UDP     |
|                                                     +--------------------------+------------------------------+
|                                                     | -stop                    | 停止                         |
+-----------------------------------------------------+--------------------------+------------------------------+