BLE Cli

[English]

1、功能概述

为了便于验证BLE相关的功能，为此设计了一系列AT CMD。所有BLE AT CMD命令以 AT+ 开头，后接具体命令和参数。如果命令执行成功，则返回 CMDRSP:OK。如果命令执行失败，则返回 CMDRSP:ERROR。

2、代码路径

路径: \components\bk_bluetooth\api\bk_at_ble.c

3、cli命令简介

支持的命令如下:

1.AT+BLEADVPARAM

• 功能说明

  用来设置广播参数（包括传统广播、扩展广播和周期性广播）

• 命令格式

  AT+BLEADVPARAM=param1,param2,param3,param4,param5,param6,param7,param8

  param1	adv channel map
  param2	Minimum advertising interval Range: 0x000020 to 0xFFFFFF(Time = N * 0.625 ms)
  param3	Maximum advertising interval Range: 0x000020 to 0xFFFFFF(Time = N * 0.625 ms)
  param4	Own_Address_Type 0x00 : Public Device Address 0x01 : Random Device Address 0x02 : Resolvable Private Address,if no IRK use the public address 0x03 : Resolvable Private Address,if no IRK use the random address
  param5	adv_type 0x00 : Legacy advertising 0x01 : Extended advertising 0x02 : Periodic advertising
  param6	adv_properties(Bit number) 0 : Connectable advertising 1 : Scannable advertising 2 : Directed advertising 3 : High Duty Cycle Directed Connectable advertising 4 : Use legacy advertising PDUs 5 : Omit advertiser’s address from all PDUs(“anonymous advertising”) 6 : Include TxPower in the extended header of the advertising PDU
  param7	Primary_Advertising_PHY 0x01 : Primary advertisement PHY is LE 1M 0x03 : Primary advertisement PHY is LE Coded
  param8	Secondary_Advertising_PHY 0x01 : Secondary advertisement PHY is LE 1M 0x02 : Secondary advertisement PHY is LE 2M 0x03 : Secondary advertisement PHY is LE Coded

• 测试用例

  设置传统adv参数：AT+BLEADVPARAM=7,120,160,0,0,3,1,1

  设置扩展adv参数：AT+BLEADVPARAM=7,120,160,0,1,1,1,1

  设置周期adv参数：AT+BLEADVPARAM=7,120,160,0,2,0,1,3

2.AT+BLEADVDATA

• 功能说明

  这条AT命令用来设置广播的数据，adv包括传统ADV和ext_ADV

• 命令格式

  AT+BLEADVDATA=param1,param2

  param1	Advertising data, the data format is shown in Figure 1
  param2	Advertising_Data_Length Range: 0x00 to 0x1F

  

  Figure 1. Advertising and Scan Response data format

  常用AD type见下表：

  Type Value	Description
  0x01	«Flags»
  0x02	«Incomplete List of 16-bit Service Class UUIDs»
  0x03	«Complete List of 16-bit Service Class UUIDs»
  0x04	«Incomplete List of 32-bit Service Class UUIDs»
  0x05	«Complete List of 32-bit Service Class UUIDs»
  0x06	«Incomplete List of 128-bit Service Class UUIDs»
  0x07	«Complete List of 128-bit Service Class UUIDs»
  0x08	«Shortened Local Name»
  0x09	«Complete Local Name»

• 测试用例

  AT+BLEADVDATA=0201060909373235365f424c45,D，此广播中配置了«Complete Local Name» ，参考ASSIC码表，可知Name为 7256_BLE

3.AT+BLESCANRSPDATA

• 功能说明

  这条AT命令用来设置扫描响应数据

• 命令格式

  AT+BLESCANRSPDATA=param1,param2

  param1	Scan_Response_Data, the data format is shown in Figure 1
  param2	Scan_Response_Data_Length Range: 0x00 to 0x1F

• 测试用例

  AT+BLESCANRSPDATA=0909373235365f424c45,A

4.AT+BLEPERADVDATA

• 功能说明

  这条AT命令用来设置周期性广播的数据

• 命令格式

  AT+BLEPERADVDATA=param1,param2

  param1	Periodic_Advertising_Data, the data format is shown in Figure 1
  param2	Periodic_Advertising_Data_Length Range: 0x00 to 0x1F

• 测试用例

  AT+BLEPERADVDATA=0909373235365f424c45,A

5.AT+BLEADVENABLE

• 功能说明

  这条AT命令用来开关传统/扩展/周期性广播

• 命令格式

  AT+BLEADVENABLE=param1

  param1

  Advertising_Enable 0x00 : Advertising is disabled 0x01 : Advertising is enabled

• 测试用例

  关闭广播：AT+BLEADVENABLE=0

  开启广播：AT+BLEADVENABLE=1

6.AT+BLESCANPARAM

• 功能说明

  这条AT命令用来设置扫描参数

• 命令格式

  AT+BLESCANPARAM=param1,param2,param3,param4

  param1	Own_Address_Type 0x00 : Public Device Address 0x01 : Random Device Address 0x02 : Resolvable Private Address,if no IRK use the public address 0x03 : Resolvable Private Address,if no IRK use the random address
  param2	Scanning_PHYs 0x01 : Scan advertisements on the LE 1M PHY 0x04 : Scan advertisements on the LE Coded PHY 0x05 : Scan advertisements on the LE 1M PHY and Coded PHY
  param3	Scan_Interval Range: 0x0004 to 0xFFFF(Time = N * 0.625 ms)
  param4	Scan_Window Range: 0x0004 to 0xFFFF(Time = N * 0.625 ms)

• 测试用例

  AT+BLESCANPARAM=0,1,64,1e

7.AT+BLESCANENABLE

• 功能说明

  这条AT命令用来开关扫描

• 命令格式

  AT+BLESCANENABLE=param1

  param1

  LE_Scan_Enable 0x00 : Scanning disabled 0x01 : Scanning enabled

• 测试用例

  关闭扫描：AT+BLESETSCANENABLE=0

  开启扫描：AT+BLESETSCANENABLE=1

8.AT+BLECREATECONNECT

• 功能说明

  这条AT命令用来进行BLE连接

• 命令格式

  AT+BLECREATECONNECT=param1,param2,param3,param4,param5,param6

  param1	Connection_Interval Range: 0x0006 to 0x0C80(Time = N * 1.25 ms)
  param2	Con_Latency Range: 0x0000 to 0x01F3
  param3	Supervision_Timeout Range: 0x000A to 0x0C80(Time = N * 10 ms)
  param4	Initiating_PHYs(Bit number) 0 : Scan connectable advertisements on the LE 1M PHY 1 : Connection parameters for the LE 2M PHY are provided 2 : Scan connectable advertisements on the LE Coded PHY
  param5	Peer_Address_Type 0x00 : Public Device Address or Public Identity Address 0x01 : Random Device Address or Random (static) Identity Address
  param6	Peer_Address

• 测试用例

  AT+BLECREATECONNECT=17,0,1f4,1,1,db:b4:6f:66:8a:db

9.AT+BLECANCELCONNECT

• 功能说明

  这条AT命令用来取消正在进行的BLE连接

• 命令格式

  AT+BLECANCELCONNECT

  此命令没有参数。

• 测试用例

  AT+BLECANCELCONNECT

10.AT+BLEDISCONNECT

• 功能说明

  这条AT命令用来断开指定的BLE链路

• 命令格式

  AT+BLEDISCONNECT=param1

  param1

  Peer_Address

• 测试用例

  AT+BLEDISCONNECT=db:b4:6f:66:8a:db

11.AT+BLEPOWER

• 功能说明

  这条AT命令用来开关蓝牙

• 命令格式

  AT+BLEPOWER=param1

  param1

  bluetooth on/off 0x00 : turn on bluetooth 0x01 : turn off bluetooth

• 测试用例

  关闭蓝牙：AT+BLEPOWER=0

  开启蓝牙：AT+BLEPOWER=1

12.AT+BLEREGISTERSERVICE

• 功能说明

  这条AT命令用来进行注册一个新服务

• 命令格式

  AT+BLEREGISTERSERVICE=param1,param2,[param3,param4,param5]

  param1	service_id Range: 0 to 35
  param2	Service UUID Range: 0x0000 to 0xFFFF
  param3	Characteristic UUID(optional) Range: 0x0000 to 0xFFFF
  param4	data_len this param is optional, used for notification test, that specifys the length of value to be notified
  param5	interval(ms) this param is optional, used for notification test, that specifys the interval to notify value

• 测试用例

  AT+BLEREGISTERSERVICE=1,ff11,ff12,20,2000

13.AT+BLEUNREGISTERSERVICE

• 功能说明

  这条AT命令用来进行注销指定的服务

• 命令格式

  AT+BLEUNREGISTERSERVICE=param1

  param1

  Service UUID Range: 0x0000 to 0xFFFF

• 测试用例

  AT+BLEUNREGISTERSERVICE=ff11

14.AT+BLEBOND

• 功能说明

  这条AT命令用来进行BLE配对

• 命令格式

  AT+BLEBOND=param1

  param1

  Peer_Address

• 测试用例

  AT+BLEBOND=db:b4:6f:66:8a:db

15.AT+BLEATTREAD

• 功能说明

  这条AT命令用来设备作为master时进行读取slave的特征值

• 命令格式

  AT+BLEATTREAD=param1,param2,param3

  param1	Device_ID Default: 0 (Start from value 0)
  param2	Con_Idx Default: 0 (Start from value 0)
  param3	Attribute_Handle Start from value 0 (The value is reported during the BLE connection)

• 测试用例

  AT+BLEATTREAD=0,0,9

反馈该文档建议