TOUCH Cli

[中文]

1、Function overview

In order to verify the function of TOUCH, a series of cli CMDs are designed for this purpose, mainly including single-channel working mode and multi-channel scanning working mode. Whether the current cli command takes effect is determined by the macro CLI_CFG_TOUCH, and the macro control position is in the: components\bk_cli\cli_config.h file, whether this macro takes effect is determined by the internal macro CONFIG_TOUCH_TEST.

2、Code path

path: components\demos\peripheral\touch\touch_demo.c

3、Cli command introduction

The supported CMDs are as follows:

1.touch_single_channel_calib_mode_test
  • Function Description

    Used to test the function of touch single channel.

  • CMD Format

    touch_single_channel_calib_mode_test param1 param2

    Param

    value

    param1

    touch channel id

    option: 0 - 15

    param2

    Sensitivity level selection

    option: 0 / 1 / 2 / 3

  • Test Case

    Test touch channel 2: touch_single_channel_calib_mode_test 2 1

2.touch_multi_channel_scan_mode_test
  • Function Description

    Used to test the function of touch multi-channel scanning work.

  • CMD Format

    touch_multi_channel_scan_mode_test param1 param2

    Param

    value

    param1

    start / stop

    param2

    Sensitivity level selection

    option: 0 / 1 / 2 / 3

  • Test Case

    Test all touch channels:touch_multi_channel_scan_mode_test start 1